--- title: Tramex Flat Roof | Novamart AG url: https://novamart.ch/en/brands/tramex/tramex-flat-roof/ language: en-GB --- # Tramex Flat Roof | Novamart AG > Tramex moisture meters for flat roof inspection and leak detection. At Novamart AG. Partner ## Roof inspection and ## Water leak detection # Roof moisture meters for checks, leaks & flat roof inspections ### Moisture meters for the inspection of flat roofs | From the moment a flat roof is installed, the structure should be regularly maintained and inspected. Any problems or defects must be rectified as soon as they are noticed to prevent further damage to the roof. The Tramex moisture testers for roofs provide **Fast and accurate results** . In addition, the Tramex roof scanners offer the **Most economical and reliable method for detecting moisture damage in flat roofs** . The **Dec scanner DS2** and the **RWS roof and wall scanner** have been developed to **Moisture condition of an entire roof surface according to ASTM D7954 quickly and non-destructively** to evaluate. Both devices are suitable **Ideal for detecting and locating the source of a leak** and to the **Locating and mapping damaged insulation and roofing materials** . The **Tramex Roof Moisture Inspection Kits** are not only suitable for the assessment of possible moisture problems, but can also be used to carry out a **Integrity tests** can be used on a newly installed roof system. No special operating licences are required and the building does not need to be evacuated, and best of all, the test can be carried out at any time of day. | | --- | ### DS2 - Scan your flat roof quickly and thoroughly | The **Tramex Dec-Scanner DS2** is ideal for carrying out moisture measurements on a **large flat roof area** . | | --- | | ASTM D7954 compliant. **Instant, non-destructive and continuous scanning** of a large roof area saves you time and money. On a normal working day, up to **100,000 square metres** be covered. **Multiple sensitivity ranges** enable the scanning of a wide range of roof structures and thus the inspection of both superstructures and thin-film roofs. The **3 different depth readings** help to localise moisture in the roof structure. You can use up to **2 % detect excess moisture at a depth of up to 6 inches** . No special operating licence required. Transport on the road or by plane is effortless with our robust flight case (included). | | | --- | --- | ### RWS - Deep moisture measurement of walls and roofs | The **Tramex RWS roof and wall scanner** has several measuring modes for **immediate, precise and non-destructive evaluation** the moisture conditions in wall and roof constructions. | | --- | | | The RWS is a hand-held device that can be used with the supplied **Extension handle** can also be used in "hard-to-reach" places. The **Multiple deep penetration** and the **Sensitivity selection** allow the user to trace leaks back to their source. ASTM D7954 compliant. Can be used for **Roofs, ETICS, foam insulation systems** and other applications in the building envelope. | | --- | --- | ## Measurements on the skin - [Tramex Dec Scanner DS2](https://novamart.ch/en/product/tramex-dec-scanner-ds2/) [TRAMEX DS2](https://novamart.ch/en/product/tramex-dec-scanner-ds2/) Non-destructive moisture scanner for leak detection and monitoring of flat roofs - [Tramex Roof & Wall Moisture Scanner RWS](https://novamart.ch/en/product/tramex-roof-and-wall-moisture-scanner-rws/) [TRAMEX RWS](https://novamart.ch/en/product/tramex-roof-and-wall-moisture-scanner-rws/) Non-destructive moisture scanner for walls and roof systems ### Probes for measurements below the roof surface | Determine the moisture content and measure the relative humidity under the roof covering or in wall constructions. To do this, pins or probes are inserted into the surface material through small drill or puncture holes. The **insulated pin electrodes** measure the moisture content **deep inside soft materials** such as insulating materials. The **Probes for relative ambient humidity** measure the relative ambient humidity **in % in roof or wall cavities** . The **Wooden pin electrodes** measure the moisture content **of wood and wood by-products** . This accessory can be used with the **Concrete Moisture Encounter CMEX5** can be used. | | --- | ### CMEX5 - More than just a concrete measuring device | The **Tramex Concrete Moisture Encounter CMEX5** may seem out of place in a section on roofs, but concrete or cementitious materials can also be found on flat roofs. The CMEX5 moisture analyser has the additional advantage that it can measure the **Ambient conditions with the built-in Hygro-i2 sensor** can measure. It also has a bayonet connection for **Optional accessories such as needle probes and sensors for relative humidity** . | | --- | | | **Non-destructive testing** of concrete and cementitious materials with immediate results. **Immediate reading** of ambient conditions and temperature. The optional **Bayonet plug-in connection** extends the measurement options: - Review of the **Moisture content in insulation materials** with **Tramex electrodes** . - Measure the **Ambient conditions in cavities** of roof and wall constructions with **Tramex probes for relative humidity** . - Determine the **Moisture content of wood** with **Tramex pin probes** . Save **Measured values and geotag locations** in reports with the Tramex Meters app. | | --- | --- | ## Measurements on and under the skin - [Tramex CMEX5 concrete moisture meter](https://novamart.ch/en/product/tramex-concrete-moisture-encounter-cmex5/) [TRAMEX CMEX5](https://novamart.ch/en/product/tramex-concrete-moisture-encounter-cmex5/) Concrete moisture meter for measuring the moisture content and relative humidity in concrete floors and slabs, wood and building materials - with probe connection. CMEX5 and previous version available for hire/rental. ## Kits for roof inspection | Tramex has developed kits for roof inspection and surveying professionals. The Tramex kits for roofs contain the necessary tools for further investigation if increased moisture is detected, allowing the roof inspector to carry out a complete and comprehensive investigation from start to finish. | | --- | ### RIK - Moisture detection and leak detection | | The **Tramex Roofing Inspector Kit RIK** is perfectly suited for the realisation of a **Roof inspection or measurement** the detection of **Leakages** and the creation of a clear picture of the **Humidity conditions** within a built-up roof system. | | --- | --- | ### RMK - Moisture detection and inspection deeper in the building structure | The **Tramex Roofing Master Kit RMK** offers all instruments of the Inspector Kit PLUS the mobile **Dec Scanner DS2** with which in **a large flat roof area in a short time** can be scanned. The ideal kit for carrying out a roof survey or flat roof inspection. | | | --- | --- | ## Kits for measurements on and under the skin - [Tramex Roofing Inspector Kit - RIK](https://novamart.ch/en/product/tramex-roofing-inspector-kit-rik/) [TRAMEX RIK](https://novamart.ch/en/product/tramex-roofing-inspector-kit-rik/) Equipment for non-destructive flat roof moisture inspection - [Tramex Roofing Master Kit - RMK](https://novamart.ch/en/product/tramex-roofing-master-kit-rmk/) [TRAMEX RMK](https://novamart.ch/en/product/tramex-roofing-master-kit-rmk/) Kit for non-destructive flat roof moisture testing and leak detection --- Novamart AG, Rosenbergsaustrasse 7, 9434 Au SG, Schweiz. Telefon +41 71 228 88 33, info@novamart.ch. Übersicht für Agenten: https://novamart.ch/llms.txt