---
title: 1700/1750 - Optional test plates | Novamart AG
url: https://novamart.ch/en/product/abrader-test-accessories/
language: en-GB
---

# 1700/1750 - Optional test plates | Novamart AG

> Optionale Prüfplatten sind für die Verwendung mit dem Taber Rotary Abraser (Abrader) 1700/1750 erhältlich und bieten einen praktischen Untergrund für Beschichtungen und andere Materialien.

Your product

# 1700/1750 - Optional test plates

[Product overview](https://novamart.ch/en/product-catalogue-3/) / [Charts, maps & sample sheets](https://novamart.ch/en/product-category/charts-maps-sample-sheets/) / [Special substrates](https://novamart.ch/en/product-category/charts-maps-sample-sheets/special-substrate/) / 1700/1750 - Optional test plates

## 1700/1750 - Optional test plates

Optionale Prüfplatten sind für die Verwendung mit dem Taber Rotary Abraser (Abrader) 1700/1750 erhältlich und bieten einen praktischen Untergrund für Beschichtungen und andere Materialien. Die Prüfplatten sollten gespritzt, gezogen oder kontrolliert getaucht werden, um eine gleichmäßige Beschichtung zu erzielen.

SKU: Taber 1700/1750 - Test AccessoriesCategories: [Abrasion / abrasion](https://novamart.ch/en/product-category/measuring-instruments/_material_surface_layers/abrasion_abrasion/) , [Metal panels & sample sheets](https://novamart.ch/en/product-category/charts-maps-sample-sheets/metal-panels-pattern-sheets/) , [Special substrates](https://novamart.ch/en/product-category/charts-maps-sample-sheets/special-substrate/)

## Required accessories relevant ...

- [Taber Rotary Abraser 1700 / 1750](https://novamart.ch/en/product/abrader-rotary-platform-abrasion-tester/)

- Variants & Accessories
- Documents
- Additional information

### Model overview

- **Steel (S-16)** Evenly punched from grade 20 sheet metal and matted for good adhesion of the coating to the metal. 100 mm square with rounded corners and a centre hole of 6.35 mm.
- **Wood (S-17)** Made from grade A1 birch plywood sanded on both sides, 6.35 mm (0.25 inch). 100 mm square with a 6.35 mm centre hole.
- **Aluminium (S-18)** Made from 19-gauge aluminium (5052). 100 mm square with rounded corners and a 6.35 mm centre hole.
- **Glass (S-31)** High-quality flat glass, approx. 3.15 mm thick. 100 mm square with a 6.35 mm centre hole.

NOTE: If you are preparing your own test panels, make sure the sides are flat and parallel. A simple way to check flatness is to place a ruler across the surface of the test panel and check that there is no gap. Use a file to remove any burrs from the centre hole and edges.

Two standardisation plates are offered which are used to determine the abrasion properties of certain Taber abrasives. These include:

- **Zinc (S-34)** Rolled zinc sheet with a thickness of approx. 0.8 mm. Used to check the wear rate of sandpaper strips such as S-42. Note that the S-34 zinc sheet should not be used for more than 10 calibrations per side. 100 mm square with a 6.35 mm centre hole.
- **Plexiglass (S-38)** Moulded acrylic glass for evaluating the abrasion properties of the material used with the **Taber Grit Feeder Attachment** sand used. 100 mm square with a 6.35 mm centre hole and protective film on both sides.

[Taber Test Accessories Data Sheet_v5](https://novamart.ch/storage/2023/11/Taber-Test-Accessories-Data-Sheet_v5.pdf)

## Additional information

| brand | Taber |
| --- | --- |
| Mission | Laboratory |

---

Novamart AG, Rosenbergsaustrasse 7, 9434 Au SG, Schweiz. Telefon +41 71 228 88 33, info@novamart.ch. Übersicht für Agenten: https://novamart.ch/llms.txt