Optional ...
Your product
Tramex Flooring Installer Tech Kit - FTK
Tramex Flooring Installer Tech Kit - FTK
Non-destructive testing of concrete moisture before laying the floor
Required accessories relevant ...
WITH BLUETOOTH AND ASSOCIATED APP
The Tramex FTK is a compact concrete moisture meter for instant, non-destructive, quantitative testing of the moisture content of concrete floors and environmental conditions. It is the ideal non-destructive measuring device for monitoring the most important information at the time of installation.
The Tramex CME5 Moisture Meter allows non-destructive quantitative testing of the moisture content of concrete using gravimetric tests as a basis and comparative tests in accordance with ASTM F2659.
The Tramex Ambient Feedback Datalogger is used to test, monitor and time the relative humidity, temperature and dew point in the environment. The Tramex contact temperature sensor provides temperature readings of the floor surface.
The Tramex Flooring Installer Tech Kit is supplied with an extension handle in a Tramex Easy-travel case. The Bluetooth connection to the Tramex gauge app allows you to visualise readings and data reports on mobile devices, GeoTag test results, create, save and share photos, reports and graphs, and view the gauge screen on your mobile phone when extending in hard-to-reach places.
Concrete Moisture Encounter 5 - CME5 - Measuring range:
- Depth of penetration:
approx. 20 mm (¾") - Moisture content of the concrete:
0 → 6% - Equivalent moisture content for anhydrite according to the carbide method:
0→ 1.9 - Equivalent moisture content of the carbide method for concrete:
0 → 4
Feedback Datalogger DL-RHTX Measuring range:
- Memory:
100,000 data point entries (samples of ambient humidity and temperature; surface temperature) - Recording rate:
Logger interval adjustable between 10 minutes and 1 hour - Transmission range:
Up to 50m (165ft) line of sight - Bluetooth:
BLE Bluetooth Low Energy 4.2 compliant
Relative Humidity Sensor Specifications:
- Area:
0 to 100%RH - Measurement accuracy:
±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (at 25ºC (77ºF)) - Resolution:
0.1% over the entire range - Drift:
<0.25%RH per year
Temperature Sensor Specifications:
- Area:
-40ºC to 125ºC (-40ºF to 257ºF) - Measurement accuracy:
±0.1 °C range 20°C to 60°C (±0.1ºF range 68ºF to 140ºF) - Sensor protection:
PTFE film protects the sensor opening from water and dust Drift: 0.03 ºC (<0.04 ºF) per year - Drift:
<0.03 ºC (0.04 ºF) per year
Contact temperature sensor (optional):
- Units:
ºC (ºF) - Temperature range:
-30°C to +80°C (-20°F to +175°F) - Measurement accuracy:
±0.5°C from -10°C to +85°C (±0.9ºF from 14ºF to 185ºF) - Resolution:
0.1% over the entire range
Kit specifications
- Size:
33.5cm x 24cm x 8cm (13.2" x 9.5" x 3.2") - Weight:
1.3kg (2.8 lbs) - Power:
3 x AA batteries
Kit contents
CMEX5 – Concrete Moisture Encounter X5
DL-RHTX - Ambient Feedback Datalogger
Free App available for Android and iOS (phone not included)
CTP - Contact Temperature Probe
E5-HBS - Extension Handle & Clamp
similar products
HIPP - 1 x Hygro-i2 ® Reusable Relative Humidity probe
RHIE2 - Electronic Interface Cable
CALCRH - Calibration Check Plate
IRT2 - Infrared Surface Thermometer
Additional information
| brand | Tramex |
|---|---|
| Standards | ASTM F2659 |
| Substrates/substances | Concrete / screed |
| Property categories-new | Humidity air, humidity g/kg, humidity relative RH, humidity material, dew point, temperature air / environment, kit |
| Property-manufacturer-categories-new | Tramex floor inspection kits |
| ws Tramex | wstr floor kits |
