+41 71 228 88 33 info@novamart.ch

Optional ...

Your product

Tramex Water Damage Restoration Master Kit X - WDMK-X

Wdmk X Water Damage Restoration Master Kit X F
Mex5 Front Shallow Depth Screen F
Mex5 Back Side Angle 1
Cmex5 Front 4 0 Concrete Usa
Cmex5 Back Angle On White Bg
Dl Rhtx On Tripod Straight On White Bg
Hand Held Pin Probe Square Hh14tp30
Hand Held Probe With 7 Long Pins Square
Rhp Nwb Long Narrow Rh Sample
Rhie2 V1 Binder Connection Hygro I2 Probe X1 On White Bg Web Res
Irt2 Infrared Thermometer
Rhhlsr Hygro I Hole Liner Yellow Hole Liner And Red Cap
E5 Hbs Extension Handle And Bracket For Use With Me5 And Cme5
Hygro I2 Probe On White Bg
Sal75 Calibration Salt Check For Hygro I2 Probe

Tramex Water Damage Restoration Master Kit X - WDMK-X

For assessing and monitoring the moisture content and humidity in buildings in connection with water damage

SKU: TRAMEX WDMK-X Categories: , , , ,

WITH BLUETOOTH AND ASSOCIATED APP

The Tramex Water Damage Restoration Master Kit X is the top-of-the-line kit with the best digital gauges for testing and monitoring the moisture content and relative humidity of environmental conditions, concrete, wood, tile, drywall, plaster and numerous building materials after water damage.

Walls and floors

With the multifunctional Tramex MEX5 for non-invasive testing of the moisture content of drywall, wood, plaster, bricks, tiles, masonry, resilient floor coverings, laminate and roofs at two depths. The MEX5 allows measurements up to a depth of 9 mm (⅜") and eliminates the influence of the substrate on the measured values. The numerous advanced settings include a basic setting that allows comparison with the standard target for dryness. The MEX5 measures the moisture content of wood and the pin meters measure the moisture content of drywall as well as WME comparison values in various building materials.

concrete

The CMEX5 digital concrete moisture analyser from Tramex enables instant, non-destructive quantitative measurement of moisture content using gravimetric tests as a basis. The CMEX5 also has a bayonet connection for reusable Tramex Hygro-i2 RH probes for in-situ testing of concrete.

Ambient and in-situ air conditions

The measuring devices have built-in hygrometers for ambient conditions, psychrometric values and enthalpy, a built-in infrared surface thermometer and also contain the external In-situ RH sensor for in-situ equilibrium RH measurements and psychrometric environmental conditions, temperature, GPP g/kg and dew point conditions. The reusable Hygro-i2 sensor can also be used with the Tramex Feedback Datalogger can be used to obtain live readings and time logs of relative humidity, temperature and dew point in the environment and in materials and air spaces. Built-in hygrometers and infrared surface thermometers provide psychrometric data, surface temperature, GPP g/kg and dew point conditions.

Moisture mapping

The Bluetooth connection to the Tramex Meters app enables visualisation of readings, moisture mapping and data reporting on mobile devices, GeoTag test results, creation, storage and sharing of photos, reports and graphs, as well as displaying the meter screen on your mobile phone when you go to hard-to-reach places.

The Tramex Water Damage Restoration Master Kit X comes with an extension handle in a protective, heavy-duty carrying case with die-cut foam lining.

 

Concrete Moisture Encounter X5 - CMEX5 - Measuring range:

  • Depth of penetration in concrete:
    approx. 20mm (¾")
  • Moisture content for concrete:
    0 → 6.9 %
  • Comparatively for gypsum screed:
    0 → 12
  • CM-equivalent anhydrite/concrete:
    0→2.7 / 0→4.3
  • Reference scale:
    0 → 100
  • Relative humidity:
    0 → 99%
  • (with optional Hygro-i2 ® sensor):
    0% → 99%RH +/- 2% @ 25°C / 77°F
  • Moisture content for wood (with optional wood pin probes):
    5 → 30 %

Moisture Encounter MEX5 measuring range

  • Depth of penetration:
    - Flat signal: up to 9 mm (⅜")
    - Deep signal: up to 30mm (1¼")
  • NDT moisture content for wood:
    0 → 30% MC
  • NDT comparative value for building materials:
    0 → 100
  • Pin % MC Wood:
    6 → approx. 50% MC
  • Pin % MC Drywall:
    0 → 8.5% MC
  • Relative humidity:
    0 → 99%
  • (with optional Hygro-i2 ® sensor):
    Humidity Accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F

Feedback Datalogger DL-RHTX Measuring range:

  • Memory:
    100,000 data point entries (samples of ambient humidity and temperature; surface temperature)
  • Recording rate:
    Logger interval adjustable between 10 minutes and 1 hour
  • Transmission range:
    Up to 50m (165ft) line of sight
  • Bluetooth:
    BLE Bluetooth Low Energy 4.2 compliant

Relative Humidity Sensor Specifications:

  • Area:
    0 to 100%RH
  • Measurement accuracy:
    ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (at 25ºC (77ºF))
  • Resolution:
    0.1% over the entire range
  • Drift:
    <0.25%RH per year

Temperature Sensor Specifications:

  • Area:
    -40ºC to 125ºC (-40ºF to 257ºF)
  • Measurement accuracy:
    ±0.1 °C range 20°C to 60°C (±0.1ºF range 68ºF to 140ºF)
  • Sensor protection:
    PTFE film protects the sensor opening from water and dust Drift: 0.03 ºC (<0.04 ºF) per year
  • Drift:
    <0.03 ºC (0.04 ºF) per year

Infrared thermometer IRT2

  • Temperature range:
    -50 to 650 ºC (-58ºF ~ 1202ºF)
  • Ratio of distance to spot:
    D:S = 12:1
  • Resolution of the display:
    0.1 ºC (0.1ºF) 1000
    At an ambient temperature of 23 to 25ºC (73 to 77ºF) -50 ~ 20ºC (-58ºF ~ 68ºF)
  • Accuracy for targets:
    ±2.5 ºC (4.5 ºF) 20 ºC ~300 ºC (68 ºF ~572 ºF) ±1.0% ±1.0 ºC (1.8 ºF) 300 ºC ~650 ºC (572 ºF ~ 1202 ºF) ±1.5%
  • Reproducibility:
    -50~20ºC (-58~68ºF): ±1.3ºC (2.3ºF) 20~650ºC (68~1202ºF): ±0.5% or ±0.5ºC (0.9ºF)
  • Response time:
    150ms
  • Spectral response:
    8~14um
  • emissivity:
    Digitally adjustable from 0.10 to 1.0
  • Display of overrange:
    LCD displays "--"
  • Polarity:
    Automatic (no display for positive polarity); minus (-) sign for negative polarity
  • Diode laser output:
    <1mW, wavelength 630~670nm, class 2 laser product
  • Operating temp:
    0 to 50ºC (32 to 122ºF)
  • Storage temp:
    -10 to 60 ºC (14 to 140 ºF)
  • Relative humidity:
    10%~90%RH during operation, <80%RH during storage
  • Power supply:
    9V battery, NEDA 1604A or IEC 6LR61, or equivalent
  • Security:
    " CE " Compliant with EMC

Kit specifications:

  • Size:
    52cm x 48cm x 15cm (20.5″ x 18.9″ x 5.9″)
  • Weight:
    4.9kg (10.8 lbs)
  • Power supply:
    5 x AA batteries, 1 x 9-volt PP3 battery

 

Kit contents

Concrete Moisture Encounter X5 - CMEX5
Moisture Encounter X5 - MEX5
Feedback Datalogger - DL-RHTX
Free App available for Android and iOS (phone not included)
Heavy-duty pin-type wood probe - HH14TP30
7.8″ (200mm) insulated pins for in-depth penetration - HH14SP200
10″ (260mm) Narrow Wand Relative Humidity Probe - RHP-NW
1 x Hygro-i2 ® Relative Humidity probe - HIPP
Hole liners - RHHLSR
Calibration Check Salts - SAL75
Infrared Thermometer - IRT2
Extension Handle - E5-HBS

similar products

CALCRH - Calibration Check Plate CME5
CALBOXME5 - Calibration Check Box ME5
HIPP - Tramex Hygro-i2 Probe
HA21SP52 - Hammer Action Pin Type Electrode

tramex-wdmk-x-eg-Data-Sheet

tramex-meters-app-eg-Getting-Started

tramex-meters-app-eg-dataloggers

tramex-meters-app-eg-Moisture-Mapping

Additional information

brand

Tramex

Industry sectors

Civil engineering

Substrates/substances

Wood & by-products, concrete / screed, masonry / bricks, drywall / plasterboard, plaster / gypsum, tiles / roof tiles / boards, roof waterproofing / flat roof, resilient floor coverings / laminate

Property categories-new

Humidity air, humidity g/kg, humidity relative RH, humidity material, temperature air / environment, temperature material, kit

Property-manufacturer-categories-new

Tramex water damage restoration kits

ws Tramex

wstr water damage kits

Interesting ...