Your product
Spiral doctor blade film applicators Wire-Cators
Spiral doctor blade film applicators Wire-Cators
Wire-wrapped steel rods for applying controlled film thicknesses of liquid coatings ("Wire-Bar Applicators" or "Mayer Rods"). Coatings flow out of the grooves between the wires - the wire diameter determines the wet film thickness.
Zum Auftragen kontrollierter Filmdicken von Flüssigbeschichtungen. Allgemeine Beschreibung: Wire-wrapped steel rods: Beschichtungen fließen aus den Rillen zwischen den Drähten – der Drahtdurchmesser bestimmt die Nassfilmdicke. Auch bekannt als “Wire-Bar Applikatoren” und “Mayer Rods”.
Features of the Leneta Wire-Cators™
- Drahtdurchmesser: 0,064 – 1,9 mm (2,5 – 75 mils), ergibt Nassfilmdicken: 0,18 – 6 mils (4,5 – 150 µm)
- Length of the winding: 254 mm (10 inch). Sufficiently long to coat most standard size plates and charts.
- Length of the rod: 305 mm (12 inch). Provides one inch (25 mm) of gripping clearance at each end.
- Diameter of the rod: 12.7 mm (1/2 inch). Thick enough to ensure essentially perfect rigidity.
- Composition: Made entirely of stainless steel. No rust or corrosion, even with water-based coatings. Non-magnetic, allows use with steel plates on a magnetic clamping plate.
Model overview
| Article | Drahtdurchmesser | Wet film thickness |
|---|---|---|
| WC-2.5 | 2.5 mil, 0.064 mm | 0.18 mil, 4.5 µm |
| WC-3 | 3 mil, 0.075 mm | 0.2 mil, 5 µm |
| WC-4 | 4 mil, 0.10 mm | 0.3 mil, 8 µm |
| WC-6 | 6 mil, 0.15 mm | 0.4 mil, 10 µm |
| WC-8 | 8 mil, 0.20 mm | 0.5 mil, 13 µm |
| WC-10 | 10 mil, 0.25 mm | 0.65 mil, 16 µm |
| WC-12 | 12 mil, 0.30 mm | 0.8 mil, 20 µm |
| WC-14 | 14 mil, 0.36 mm | 0.95 mil, 24 µm |
| WC-16 | 16 mil, 0.41 mm | 1.1 mil, 28 µm |
| WC-18 | 18 mil, 0.46 mm | 1.25 mil, 32 µm |
| WC-20 | 20 mil, 0.51 mm | 1.4 mil, 35 µm |
| WC-22 | 22 mil, 0.56 mm | 1.5 mil, 38 µm |
| WC-24 | 24 mil, 0.61 mm | 1.7 mil, 42 µm |
| WC-26 | 26 mil, 0.66 mm | 1.8 mil, 47 µm |
| WC-28 | 28 mil, 0.71 mm | 2.0 mil, 50 µm |
| WC-30 | 30 mil, 0.76 mm | 2.2 mil, 55 µm |
| WC-32 | 32 mil, 0.81 mm | 2.3 mil, 59 µm |
| WC-34 | 34 mil, 0.86 mm | 2.3 mil, 63 µm |
| WC-36 | 36 mil, 0.91 mm | 2.7 mil, 68 µm |
| WC-38 | 38 mil, 0.97 mm | 2.8 mil, 72 µm |
| WC-40 | 40 mil, 1.02 mm | 3.0 mil, 75 µm |
| WC-42 | 42 mil, 1.07 mm | 3.2 mil, 81 µm |
| WC-44 | 44 mil, 1.12 mm | 3.3 mil, 85 µm |
| WC-46 | 46 mil, 1.17 mm | 3.5 mil, 89 µm |
| WC-48 | 44 mil, 1.12 mm | 3.3 mil, 85 µm |
| WC-50 | 50 mil, 1.27 mm | 3.8 mil, 98 µm |
| WC-52 | 52 mil, 1.32 mm | 4.0 mil, 100 µm |
| WC-55 | 55 mil, 1.40 mm | 4.2 mil, 106 µm |
| WC-60 | 60 mil, 1.52 mm | 4.5 mil, 114 µm |
| WC-65 | 65 mil, 1.65 mm | 5.0 mil, 125 µm |
| WC-70 | 70 mil, 1.78 mm | 5.5 mil, 138 µm |
| WC-75 | 75 mil, 1.91 mm | 5.5 mil, 138 µm |
Additional information
| brand | Leneta |
|---|---|
| Mission | Aussehensprüfung, Trocknungsprüfung, Deckvermögen, Lackprüfung, Visuelle Prüfung |
| Industry sectors | !!! Painters Coaters Printers |
| Substrates/substances | Beschichtungen und Druckfarben, Nassfilm & Nasslacke, Flüssigkeiten |
| Standards | ASTM D4147 |
