Your products in the category
Film applicators / applicators
Film applicators for uniform drawdowns of paints, coatings and adhesives. From wire wound bars and cube applicators to the automatic film applicator from TQC Sheen.
Automatic film applicator AFA Compact
TQC AB3652The AFA Kompakt automatic film applicator is an entry-level film applicator that can process charts and cards up to A4 format at application speeds of 1 to 150 mm/s; suitable for both spiral doctor blades and block applicators.
Automatic film applicator AFA Standard
TQC AB4120 AB4220 AB4320 AB4420 AB4400The AFA Standard automatic film applicator provides a reliable basis for applying coating films evenly and reproducibly to charts, sheets or foils up to a maximum size of A3. Models with glass bed or perforated vacuum bed: single, double channel or heated.
Drying time recorder device for the AFA Standard automatic film applicator
TQC AB3500Drying time recorder as an option for the TQC automatic film applicators standard with firmware 2.01
Hardening pen device for the Automatic Film Applicator AFA
TQC AB3090The device enables the user to clamp a TQC hardening pen onto the TQC Automatic Film Applicator.
Heated perforated vacuum table
TQC AB4430 AB4435Perforated table with built-in temperature control and display. Uniform and consistent application of colours and coatings on test charts.
Grindometer
TQC VF2104 - VF2133TQC Sheen Grindometers are precision instruments for determining the particle size and fineness of many materials such as paints, varnishes, pigments, fillers, chocolate, etc.
Master Colour Plate Multitester Kit SP3000
TQC SP3000The Master Paint Plate Multitester SP3000 is a durable and portable cross-cut test kit, made of stainless steel and equipped with a viscosity indicator and a wet film applicator.
Spiral squeegee film applicators - 180, 230 and 320 mm
TQC AB3050+Spiral doctor blade applicator with a film width of 180, 230 or 320 mm and available in ranges from 0 to 300 µm.
Spiral squeegee film applicators - 250mm
TQC VF0100+Spiral doctor blade applicator with a film width of 250 mm and available in ranges from 4 to 200 µm.
Spiral doctor blade film applicators Wire-Cators
Leneta WCWire-wrapped steel rods for applying controlled film thicknesses of liquid coatings ("Wire-Bar Applicators" or "Mayer Rods"). Coatings flow out of the grooves between the wires - the wire diameter determines the wet film thickness.
Cube film applicators, 2-sided
TQC AB3700 AB3710 VF1590TQC Sheen Cube Applicator for applying a narrow, evenly thick film of paint. With 2 predefined thicknesses. Ideal for applying paint to narrow test charts or glass strips.
Bird film applicators, 4-sided
TQC VF1535+ VF2161+ VF1580+ VF1837Bird film applicators with flat edges. Four application sides for applying 4 different predefined thicknesses. For film widths of 50, 60, 75, 80, 100 and 150 mm.
Bird film applicators, single slit
TQC VF15xxBird film applicators with a flat edge. One application side for applying 1 predefined thickness. For film widths 50 and 75 mm.
Bird film applicators, single slit AB
Leneta ABBird applicators are determined by their film width and the intended wet film thickness they are intended to apply. The latter value is engraved on one end of the applicator.
Baker film applicators, 4-sided
TQC VF2145+ VF1500+Cylindrical film applicator with 4 application sides for applying colour films in 4 different predefined thicknesses. The Baker applicators are available for film widths of 60 mm and 80 mm.
Adjustable micrometre film applicators
TQC VF1820 - VF1825Adjustable micrometre film applicators with adjustable gap height from 0 to 8 mm.
Drainage squeegee - Anti-Sag-Meter ASM
Leneta ASMA squeegee with a series of notches that increase in depth. The depth of the notches is related to the degree of paint flow (paint run) and provides a numerical value known as the anti-sag index.
Drainage squeegee - Sag index applicator
TQC VF2250 VF2251 VF2252The sag index applicator is a squeegee specially designed for the evaluation of sag resistance. The total film width of 90 mm is evenly divided into 10 areas with gap masses graduated in 25 µm.
Gradient & flow squeegee - sag and levelling
TQC VF2246 VF2247Der Sag and Levelling Filmapplikator mit Doppelfunktion: einerseits mit 10 in 25 µm abgestuften Bereichen für den Sag Index, andererseits mit 5 Paaren von schmalen Aussparungen mit zunehmender Tiefe, um doppelte Filmstreifen zu erzeugen für das Levelling.
Logicator film applicator TG19
Leneta TG19Geometric-sequential multi-notch applicator for exploring the covering capacity in a single application over a wide range of applications, for comparing the change in covering capacity from wet to dry, and for investigating the influence of layer thickness on the drying speed and surface uniformity.
Trade Sales ("U" form) Film Applicators AT
Leneta AT-684 AT-686This device has a gap distance of 6 mil and 8 mil, whereby wet film thicknesses of around 3 and 4 mil are achieved.
Octoplex film applicator, 8-sided
TQC VF1550Multifunctional 8-sided film applicator (Octoplex) with 8 predefined side thicknesses: 25, 50, 75, 100, 125, 150, 175 and 200 µm (micrometres) with a film width of 60 mm.
Quadruplex film applicator, 4-sided with double container
TQC VF2179Film applicator with 4 application sides and double container for simultaneous application of 2 colour films in one of 4 different predefined thicknesses: 100, 200, 300, 400 µm. For film widths of 60 mm.
Quadruplex film applicators, 4-sided
TQC VF2167+ VF2172+Film applicator with container and 4 application sides for applying colour films in 4 different predefined thicknesses. These Quadruplex applicators are available for film widths of 60 mm and 80 mm.
Paper test ink film applicator TK-100
Leneta TK-21-1This cost-effective aluminium applicator was specially developed for use with Leneta test inks. One side with a 250 µm gap applies a 75 mm wide film. The other side can be used as a practical scraper.
Dow Film Caster Film Applicator AD-710
Leneta AD-710This applicator was originally designed for scrub tests with latex paints on a 16.5 x 43.2 cm (6-1/2 x 17 inch) glass surface, where a 0.09 mm (3-1/2 mil) thick test coat is applied over a 0.13 mm (5 mil) thick primer.
TQC Sheen basic inspection KIT
TQC SP5000 SP5005The carefully selected tools in our TQC Sheen Basic Inspection Kit help you to analyse the quality of old or existing layers of paint on various substrates.
Grindometer device for the Automatic Film Applicator AFA
TQC AB3075The device allows the user to clamp a TQC Grindometer scraper onto the TQC Automatic Film Applicator.
Leneta GDP-1 glass peel-off plate
Leneta GDP-1This solid glass plate helps maximise the evenness of the honing process by providing a precise flat surface. Measuring 10 x 16 in (254 x 406 mm).
Leneta GDP-3 Scuff test glass peel-off plate
Leneta GDP-3For drawdowns on Leneta Scrub Test Panels (6-1/2 x 17 in.). Dimensions of the glass plate 8-1/2 x 22 in (216 x 559 mm).
TQC Sheen glass peel-off plates
TQC VF1601 VF1602 VF1603Each TQC Sheen glass peel-off plate is manufactured to be ultra-flat and stable, so you can be confident that your sample coatings will peel off evenly when carrying out film application tests.
TQC Sheen glass peel-off strips
TQC VF810412 glass strips (without cube applicator)
No products found. Please adjust the filters.
