Accessories

PosiTector ultrasonic coupling gel

DeFelsko GEL_P GEL_T / TQC LD7102

Each PosiTector 200 and PosiTector UTG is supplied with (1) bottle of ultrasonic coupling gel. Additional 4oz. bottles are available. (sold in cases of 12).

DeFelsko cleaning putty for surfaces

DeFelsko RTRPUTTY

To clean the test surface of deposits before polishing.

DeFelsko replica tape - smoothing tool

DeFelsko RTBURNISHPL10

Round plastic tool for compressing the impression film on the blasted surface (pack of 10).

DeFelsko replica strap - holder

DeFelsko RTRTAPEHLDR

To minimise the transfer of adhesive from the adhesive tape to the measuring system of the probes.

DeFelsko replacement indenter for PosiTector BHI

TQC BHIINDENTOR

Contains additional replacement indenters (2 pieces) with replacement tool for the PosiTector BHI.

DeFelsko high-precision polishing tool

DeFelsko RTBURNISHHA

The polishing tool has an in-built spring mechanism which ensures that an even force is applied.

DeFelsko PosiTector RTR 3D polishing ball

DeFelsko RTRBALL

For best results when capturing 2D/3D parameters and images with the PosiTector RTR 3D, it is recommended to use the supplied polishing ball instead of the stainless steel polishing tool.

DeFelsko PosiTector SHD test stand

TQC SHDSTANDA SHDSTANDD

Reduces operator influence by ensuring the probe is placed vertically in a controlled, repeatable manner.

DeFelsko PosiTector SHD universal adapter

TQC SHDPRBMNT

For use with threaded connections in other test stands and calibration equipment.

DeFelsko Standard - PosiTector RTR cleaning cards

DeFelsko RTRCLEANCARD

Pre-moistened with isopropyl alcohol to remove adhesive residue and deposits from the anvils and ensure accurate testing. (RTR H and RTR 3D).

DeFelsko Bluetooth printer

DeFelsko PRINTERBT

The Bluetooth printer receives data from the Advanced models.

DeFelsko deionised water for Bresle method

DeFelsko SSTDIWATER SSTDIWATER1L

Purified, ion-free water for use with the PosiTector SST, 250 ml or 1 litre.

DeFelsko PosiTector 6000 probe foot rings

DeFelsko PRBFOOTKIT-D

They protect the coatings from unnecessary wear.

DeFelsko PosiTector 6000 probe stand with holder

DeFelsko STAND

Reduces the negative influence of the operator by ensuring that the probe is placed perpendicular to the surface of the workpiece in a controlled, repeatable manner.

DeFelsko PosiTector 6000 Telescopic probe extension

DeFelsko 6000PRBEXT

Dieses leichte, tragbare Gerät vergrössert die Reichweite von PosiTector 6000 regulären kabelgebundenen Sonden auf bis zu 124 cm (49").

DeFelsko PosiTector AC Power Kit

DeFelsko USBAC-G

This kit offers several alternative power supply solutions for your battery-operated PosiTector.

DeFelsko PosiTector DPM - Type K thermocouple probes

DeFelsko PRBDPMHSP PRBDPMLTP

Type K thermocouple probes for use with PosiTector DPMS probes.

DeFelsko PosiTector DPM L - Replacement batteries

DeFelsko DPMLBAT

Replacement batteries for the PosiTector DPM L.

DeFelsko PosiTector DPM L - Replacement filter

DeFelsko DPMLFILTER

Pack of 10 replacement filters for the PosiTector DPM L and PosiTector DPM L+.

DeFelsko PosiTector DPM L - Lock

DeFelsko DPMLLOCK

With the optional lock, the PosiTector DPM L and PosiTector DPM L+ are secure and protected.

DeFelsko PosiTector GLS cleaning cloths

DeFelsko GLSCLEANKIT

Pack of 10 replacement cleaning cloths for the PosiTector GLS.

DeFelsko PosiTector belt clip

DeFelsko BELTCLIP

Belt clip for PosiTector base unit/measuring device body.

DeFelsko PosiTector hard case

DeFelsko CASEINSP

Practical hard case for transporting a PosiTector measuring device and several probes.

DeFelsko PosiTector Pelican case for inspection kits

DeFelsko CASEINSP-P CASEINSPL-P

Hard-shell case with customised foam insert for safe storage of PosiTector measuring devices and several probes and accessories.

DeFelsko PosiTector SPG replacement tungsten carbide probe tips

DeFelsko SPGTSKIT SPG60KIT SPGCSKIT SPG30KIT

Replacement tungsten carbide probe tips for the PosiTector SPG

DeFelsko PosiTector SPG OS Large V-groove adapter

DeFelsko SPGOSPRBFOOT

Für verbesserte Stabilität bei Rohren mit einem Außendurchmesser von 30 - 45 cm (12 - 18") (nur für PosiTector SPG OS).

DeFelsko PosiTest DFT genuine leather case with belt clip

DeFelsko POUCH-DFT

Genuine leather case with belt clip for the PosiTest DFT.

DeFelsko PosiTest PC replacement probe covers

DeFelsko KITPCSCRN

To protect the probe transducer.

DeFelsko PosiTest PC USB holder

DeFelsko PCUSBFIXT

Ideal for applications where the USB cable should remain connected during the measurement.

DeFelsko PosiTest PG replacement cutting tips made of tungsten carbide

DeFelsko PGCUTTER

Replacement tungsten carbide cutting tips for the PosiTest PG.

DeFelsko round filter

DeFelsko SSTABRFILTER

Round filter for use with the PosiTector SST abrasive test kit.

DeFelsko protective film for the PosiTector display

DeFelsko LENSSHIELD

Pack of five thin plastic display covers for the PosiTector displays.

DeFelsko-Bresle plasters

DeFelsko SSTPATCHD25

Self-adhesive polyurethane Bresle test patches for measuring salt contamination in accordance with ISO 8502-6.9 - the Bresle method.

HangOn conveyor belt earthing tester

TQC LD5900 / HangOn CGT II

Simple way to test the earthing of workpieces to be coated on the conveyor

Latex Bresle plasters

DeFelsko SSTPATCHL25

Latex Bresle test patches with easy-to-open tabs and low-tack adhesive for easy removal to measure salt contamination according to ISO 8502-6.9 - the Bresle method.

PosiPatch - Flexible magnetic ring

DeFelsko SSTRINGF SSTPATCHP

Like the standard PosiPatch magnetic ring, the NEW flexible magnetic ring leaves no annoying adhesive residue that needs to be cleaned, but is designed for pipes and other applications with narrow diameters.

PosiPatch Starter Kit

DeFelsko SSTKITPATCHP SSTKITPATCHPF

For use with existing conductivity meters. Test the revolutionary, reusable Bresle PosiPatch method with a cost-effective test kit.

PosiPatch Reusable Bresle patches

DeFelsko SSTPATCHP

Reusable Bresle test patch with standard or flexible magnetic ring for measuring salt contamination in accordance with ISO 8502-6.9 - the Bresle method.

PosiTector SST - Replacement dosing tips

DeFelsko SSTDISPTIP

Replacement plastic needles for the PosiTector SST (pack of 10)

PosiTector SST - Abrasive test kit

DeFelsko SSTABRKIT

Measures the concentration of water-soluble impurities in abrasives.

PosiTest AT - 20 mm conversion kit

DeFelsko AT20KIT

Der austauschbare Aufsatz ermöglicht es einem PosiTest ATM50 oder ATA50 10, 14 und 20 mm dicke Dollies zu ziehen. Ideal für Oberflächen mit hoher Haftfestigkeit, wie z. B. Beschichtungen auf Metall.

PosiTest AT - 50 mm C1583 conversion kit

DeFelsko AT50CKIT

The interchangeable attachment allows a PosiTest ATM or ATA to pull 50 mm dollies that comply with ASTM C1583. Ideal for concrete surfaces and overlays.

PosiTest AT - 50 mm conversion kit

DeFelsko AT50KIT

The interchangeable attachment allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies. Ideal for surfaces with lower adhesive strength, such as coatings on wood, concrete and plastic.

PosiTest AT - 50 mm x 50 mm conversion kit for tiles

DeFelsko AT50TKIT

Der austauschbare Aufsatz ermöglicht es einem PosiTest ATM oder ATA, 50 mm x 50 mm große quadratische Dollies zu ziehen, die der BS EN 12004-2 entsprechen. Ideal für zementhaltigen Klebstoff für Fliesen.

PosiTest AT - Drilling template for 50 mm dollies

DeFelsko TMPLTAS

Drilling template and drill bit for isolating the test area for pull-off adhesion tests for 50 mm dollies of the Positest AT, ideal for thicker coatings on concrete.

PosiTest AT - Dollies

DeFelsko DOLLYxx

Dollies for adhesion tests with the PosiTest AT.

PosiTest AT-A - Pelican case

DeFelsko CASEATAB-P

Durable, waterproof Pelican cases, complete with a customised foam insert to keep your PosiTest device safe.

PosiTest CMM - Telescope extension

DeFelsko CMMEXT

This lightweight device increases the usefulness of the PosiTest CMM and enables quick and easy measurements of concrete moisture on large surfaces without having to bend or kneel down.

PosiTest HHD - Electrode adapter

DeFelsko HHDPCWIADPT HHDTRADPT HHD266ADPT

For connecting spring and brush electrodes from other manufacturers.

PosiTest HHD - Electrode rods

DeFelsko HHDEXTRODS HHDEXTRODL

Choose between 13 cm (5„) and 50 cm (20“) rods for the PosiTest HHD.

PosiTest HHD - Replacement fan brush electrode

DeFelsko HHDFANBRSH

Replacement fan brush electrode for PosiTest HHD and PosiTest HHD C.

PosiTest HHD - Replacement batteries

DeFelsko HHDBATTERY HHDCBATTERY

Replacement Li-ion batteries for the PosiTest HHD series.

PosiTest HHD - Replacement spring clutches

DeFelsko HHDCOUPLER

Replacement spring clutches for the PosiTest HHD.

PosiTest HHD - Spring connection

DeFelsko HHDCONNECT

Connect the PosiTest HHD to DeFelsko or SPY roller spring electrodes.

PosiTest HHD - Flat wire brush electrodes

DeFelsko HHDFLTBRSH

Flat wire brush electrodes for the PosiTest HHD.

PosiTest HHD - semi-circular brush electrodes

DeFelsko HHDHCBRSH5

Semi-circular neoprene brush for 50-127 mm (2-5“) tube OD for .PosiTest HHD.

PosiTest HHD - Hand-held wand

DeFelsko HHDWAND

Hand-held wand with a 1.5 metre long insulated cable that transforms the PosiTest HHD into a wand device.

PosiTest HHD - Conductive rubber paddle

DeFelsko HHDPADDLE

Conductive rubber paddle for PosiTest HHD.

PosiTest HHD - Rolling spring electrodes

DeFelsko HHDSPRING

Rolling spiral spring electrodes for the PosiTest HHD.

PosiTest HHD - Shoulder strap

DeFelsko HHDSTRAP

Shoulder strap for the PosiTest HHD Basic Kit.

PosiTest HHD - Extension rod

DeFelsko HHDCEXTROD

Extension rod for the PosiTest HHD C.

PosiTest LPD - Customisable sponge products

DeFelsko LPDSPONGECPK LPDSPONGERPK LPDSPONGESPK LPDWANDR

Customisable sponge products for a variety of test configurations for the PosiTest LPD.

PosiTest LPD - Wetting agent

DeFelsko LPDWET

A surfactant (wetting agent) to reduce the surface tension of the water so that the solution can enter small pinholes.

PosiTest LPD - Large roller sponge

DeFelsko LPDWANDR24

Large roller sponge for quick inspection of large areas with the PosiTest LPD.

PosiTest LPD - wired rod

DeFelsko LPDCBLDWAND

Converts the PosiTest LPD low-voltage pinhole detector into a wired device.

PosiTest LPD - Extension rod

DeFelsko LPDEXTROD

Verlängert die PosiTest LPD-Basisstange um zusätzliche 0,3 m (1').

PosiTest LPD - Accessories package

DeFelsko LPDACCPK

Includes customisable sponge holders and accessories to convert the PosiTest LPD Basic Kit into a PosiTest LPD Complete Kit in a hard case.

PosiTest OTL - Temperature probes

DeFelsko PRBOTL

A wide range of surface and air temperature probes for the PosiTest OTL oven temperature data logger.

PosiTest PT - Replacement pencils

DeFelsko PTPENCIL

Replacement pencils for the PosiTest PT Wolff-Wilborn pencil hardness tester are available as a complete set of 14 or as a pack of 12 for individual hardness grades.

PosiTest PT - Replacement blades for pencil sharpeners

DeFelsko PTBLADES

Replacement blades (10 pieces) for PosiTest PT pencil sharpener.

TQC Sheen display panel for the dust test kit

TQC SP3220

Set of 2 transparent charts for assessing the quantity and size of dust particles. These charts are included in the dust test kit or can be ordered separately.

TQC Sheen single holder for small tools

AB5042

Simple" tool insert. Fits most tools.

TQC Sheen replacement protective case for digital surface roughness gauges

TQC SP1560POUCH

A protective case specially designed for the TQC Sheen surface roughness gauge and the combined TQC Sheen surface roughness and coating thickness gauge.

TQC Sheen replacement tips for digital surface roughness gauges

TQC SP1616 SP1619

Replacement tips for use with the TQC Sheen Surface Roughness Gauge and the TQC Sheen Surface Roughness and Coating Thickness Gauge. Can be ordered as a replacement or exchange.

TQC Sheen case for SuperPIG

TQC SP1016

Case for SuperPIG

TQC Sheen sample transfer sheet for the dust test kit

TQC SP3221

Set of 10 sample transfer sheets used in the testing and assessment of dust particles. These sample transfer sheets are included in the TQC Sheen dust test kit or can be ordered individually.

Tramex 1.5″ Replacement pins for impact pin electrode HA21SP52 - SP52

TRAMEX SP52

Tramex 1.5" Ersatzstifte Für Tramex Schlag-Stiftelektrode HA21SP52

Tramex 3″ replacement pins for heavy-duty pin electrode HH14SP90 - SP90

TRAMEX SP90

3" Ersatzstifte für Tramex Heavy-Duty Stift-Elektrode HH14SP90

Tramex 5/8″ replacement pins for heavy-duty wooden pin probe HH14TP30 - TG30

TRAMEX TG30

5/8" Ersatzstifte For Tramex Heavy-duty Stift-Holz-Sonde HH14TP30

Tramex 5/8″ tapered, non-insulated replacement pins for heavy-duty wooden pin probe HH14TP30 - TP30

TRAMEX TP30

Verjüngte, nicht isolierte 5/8"-Ersatzstifte für die Tramex- Heavy-Duty-Stift-Holzsonde HH14TP30

Tramex 7″ Replacement pins for heavy-duty electrode HH14SP200 - SP200

TRAMEX SP200

7" Ersatzstifte Für Heavy-Duty Elektrode HH14SP200

Tramex Extendable Carrying Handle & Clamp - E5-HBS

TRAMEX E5-HBS

Extendable carrying handle with clamp for the Tramex 5 series moisture analysers

Tramex sealing tape for RHIH - HOODT

TRAMEX HOODT

Sealing tape for Tramex insulated RH bonnet for surface RH tests

Tramex single carrier bag - ALLPOUCH

TRAMEX ALLPOUCH

Tramex single carrier bag

Tramex replacement pins for Professional Pin Meter PTM - TP20

TRAMEX TP20

Replacement pins for PTM-professional Pin Meter

Tramex EZ Kit carrying case - ALLBAG

TRAMEX ALLBAG

Tramex EZ Kit carrying case

Tramex moisture analyser anti-slip protection - MESP

TRAMEX MESP

Rubber protectors for the electrodes of the moisture analysers

Tramex heavy-duty carrying case - MAX CASES

TRAMEX MAX CASES

Tramex heavy-duty carrying case

Tramex Hygro-i2® 19mm perforated inserts - RHHL

TRAMEX RHHL / RHHLX

Tramex Hygro-i2® 19mm Hole Liners for ASTM F2170

Tramex Hygro-i2® ASTM F2170 accessory pack - AP-F2170-B

TRAMEX AP-F2170-B

Accessory package for carrying out ASTM F2170

Tramex Hygro-i2® insertion & retrieval aid - HI-EX / HI-EXL

TRAMEX HI-EX / HI-EXL

Tramex Hygro-i2® insertion/retrieval tool

Tramex Hygro-i2® tool accessory box HI-ACC

TRAMEX HI-ACC

Tramex Hygro-i2® tool accessory box

Tramex insulated hygro bonnet for Hygro-i2 HIPP & TREMS-Xtra - RHIH

TRAMEX RHIH

Insulated hygro bonnet for non-destructive RH measurements on concrete surfaces with Hygro-i2 HIPP & TREMS Xtra

Tramex hole punch - HPW

TRAMEX HPW

For punching pilot holes for long-pin probes in thermal insulation composite and roof systems.

Tramex phono bayonet adapter - E5-PA

TRAMEX E5-PA

Tramex phono bayonet adapter

Tramex Tramex Hygro-i2® 16mm perforated inserts - RHHLsR

TRAMEX RHHLsR

Tramex Hygro-i2® 16mm Hole Liners (not for ASTM F2170)

Tramex accessory pack for CME5 & CMEX5 - AP-CM

TRAMEX AP-CM

Accessory package for CME5 and CMEX5 concrete moisture analysers

Tramex accessory pack for ME5 & MEX5 - AP-ME

TRAMEX AP-ME

Accessory pack for the ME5 and MEX5 moisture analysers

Tramex accessory pack for Skipper 5 - AP-SMM5

TRAMEX AP-SMM5

Accessory pack for Skipper 5 moisture analyser

V5 150-T /-B/ -E - Sensitivity range attachment

Taber 150-14

Das V-5 Steifigkeitsprüfgerät von Taber verwendet den Sensitivity Range (SR) Aufsatz, um das Biegemoment von extrem leichten und flexiblen Materialien mit einer Steifigkeit von weniger als 1 Taber-Einheit zu ermitteln. Beispiele hierfür sind Zellophan, Seidenpapier, Metallfolie, Film, Draht oder Faden mit kleinem Durchmesser und andere.

PosiTest AT - Adhesive set

DeFelsko LD9308/ATADHESIVEKIT

Adhesive set for PosiTest AT