Your product
PosiTector SPG surface profile & roughness measuring device
PosiTector SPG surface profile & roughness measuring device
Digital surface profile gauges for blasted steel, textured coatings and concrete profiles use a digital depth micrometer equipped with a fine, pointed probe to measure and record the heights of the surface profile from peak to valley.
Required accessories relevant ...
-
DeFelsko PosiTector SPG OS Large V-groove adapter
-
DeFelsko Standard - Certified PosiTector SPG standards
-
PosiTector Standard & Advanced - (basic unit without probe)
-
DeFelsko Standard - Non-certified metal plate and glass zero plate
-
DeFelsko PosiSoft analysis software
-
DeFelsko Standard - Set of certified PosiTector SPG plates
-
PosiTector SmartLink - (base unit without probe)
Surface profile measuring devices for blasted steel, textured coatings and concrete profiles
- Surface profile gauges use a digital depth micrometer to measure and record the heights of the surface profile from peak to valley in preparation for the application of coatings
- Larger, impact-resistant 2.8-inch colour touchscreen with redesigned keypad for fast menu navigation
- Weatherproof, dustproof and water-resistant housing in accordance with IP65
- Aluminium oxide wear surface and tungsten carbide tip for long service life and continuous accuracy - replaceable in the field
- Each PosiTector probe can be attached to a single base unit
- Fast measuring rate of over 50 readings per minute - for rapid measurement of large surfaces
- USB, WiFi and Bluetooth connection to PosiSoft PC, Mac and smartphone software
- Calibration certificate with traceability to the PTB included (long form)
Complies with ASTM D4417-B, ASTM D8271 (SPG TS only), AS 3894.5-C (with optional 30° tip), U.S. Navy NAVSEA NSI 009-32, US Navy NAVSEA PPI 63101-000, SSPC PA 17, SANS 5772, and others
Detailed information on the available PosiTector Standard and Advanced basic units. and the PosiTector Smartlink.
PosiTector SPG Standard & Advanced
For blasted steel
Standard: SPG 1Advanced: SPG 3 |
Standard: SPG S1Advanced: SPG S3 |
Standard: SPG OS1*Advanced: SPG OS3* |
|---|---|---|
 |
 |
 |
- Measuring range0 - 500 μm 0 - 20 mils
- Accuracy± (5 μm + 5%); ± (0.2 mils + 5%)
- TopAngle: 60 degrees**, radius: 50 μm (2 mils)
* The PosiTector SPG OS is a surface profile gauge that is ideal for measuring the peak-to-valley surface profile height of flat or convex surfaces with an outside diameter greater than 3 mm (0.125″), such as pipes and tanks.
** 30-degree tips available for compliance with Australian Standard AS3894.5-C
For textured coatings
Standard: SPG CS1Advanced: SPG CS3 |
|
|---|---|
 |
|
For concrete profiles
Standard: SPG TS1Advanced: SPG TS3 |
|
|---|---|
 |
|
SPG probe only
For blasted steel
PRBSPG |
PRBSPGS |
PRBSPGOS* |
|---|---|---|
 |
 |
 |
- Measuring range0 - 500 μm 0 - 20 mils
- Accuracy± (5 μm + 5%); ± (0.2 mils + 5%)
- TopAngle: 60 degrees**, radius: 50 μm (2 mils)
* The PosiTector SPG OS is a surface profile gauge that is ideal for measuring the peak-to-valley surface profile height of flat or convex surfaces with an outside diameter greater than 3 mm (0.125″), such as pipes and tanks.
** 30-degree tips available for compliance with Australian Standard AS3894.5-C
For textured coatings
PRBSPGCS |
|
|---|---|
 |
|
For concrete profiles
PRBSPGTS |
|
|---|---|
 |
|
Accessories
- PRINTERBT Defelsko Bluetooth printer
- LENSSHIELD Display protection film
- BELTCLIP Belt clip for PosiTector base units
- CASEINSP Hard case
- CASEINSPL-P/CASEINSP-P Pelican case
- USBAC-G AC power supply kit
Additional information
| brand | DeFelsko |
|---|---|
| Mission | Beschichtungsprüfung, Dickenprüfung, Rauheitsprüfung |
| Industry sectors | !!! Painters Coaters Printers |
| Substrates/substances | Coatings and printing inks |
| Standards | AS 3894.5-C (mit optionaler 30°-Spitze), ASTM D4417-B, ASTM D8271 (nur SPG TS), NSI 009-32, SANS 5772, SSPC PA17, US Navy NAVSEA NSI 009-32, US Navy PPI 63101-000 |
