Your product
Tramex feedback data logger for environment - DL-RHTA
Tramex feedback data logger for environment - DL-RHTA
Wireless sensor and data logger for ambient temperature and relative humidity
Required accessories relevant ...
CREATE VISUAL HUMIDITY MAPS AND REPORTS WITH THE TRAMEX METER APP
Features & benefits
- Bluetooth BLE-enabled for use with mobile devices.
- Up to 100,000 data point entries. Instant set-up and start modes.
- Precise recording of the relative humidity and temperature of the environment.
- Intuitive and instructive app interface.
- Customisable interactive diagrams, spreadsheets, reports and simple export functions.
- Connectivity up to 50 metres (165ft) for easily accessible data downloads.
The Tramex Ambient Feedback Datalogger DL-RHTA and the Tramex Meters App have been developed by Tramex for professionals who need accurate, reliable readings using the best and most advanced technology.
The Feedback DataLogger and the app record up to 100,000 data points for relative humidity, temperature, dew point and grains per pound, which are transmitted wirelessly to your mobile device via Bluetooth BLE technology.
The app allows you to visualise live readings, thermal conditions and psychrometric charts, as well as create and export tables, graphs and reports.The Tramex Feedback DataLogger requires the Tramex Meters app and a compatible iOS or Android mobile device.
Specifications
With built-in sensor for humidity and temperature; optional contact temperature sensor that offers the best available accuracy tolerances.
- Size: 100mm x 90mm x 35mm (3.94″ x 3.54″ x 1.38″)
- Weight: 100g (3.53oz)
- Construction: ABS housing
- Power supply: 1 x battery type AA 1.5 Volt
- Memory: 100,000 data point entries (samples of ambient humidity and temperature; surface temperature)
- Recording rate: Logger interval adjustable between 10 minutes and 1 hour
- Transmission range: Up to 50m (165ft) line of sight
- Bluetooth: BLE Bluetooth Low Energy 4.2 compliant
- Included in delivery: Wall bracket and tripod stand
Supported measurements:
- Relative ambient humidity, temperature, dew point, grains per pound.
- Psychrometric diagram with display of relative humidity, specific volume, wet bulb temperature, dry bulb temperature, enthalpy, humidity ratio, dew point.
- Contact temperature, estimated contact RH, ambient dew point, contact delta temperature (with optional contact temperature sensor)
Specifications of the humidity sensor:
- Range: 0 to 100%RH
- Accuracy: ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (at 25ºC (77ºF))
- Resolution: 0.1% over the entire range
- Drift: <0.25%RH per year
Specifications of the temperature sensor:
- Range: -40ºC to 125ºC (-40ºF to 257ºF)
- Accuracy: ±0.1°C range 20°C to 60°C (±0.1ºF range 68ºF to 140ºF)
- Sensor protection: PTFE film protects the sensor opening from water and dust
- Drift: 0.03 ºC (<0.04 ºF) per year
Specifications of the contact temperature sensor (optional):
- Units: ºC (ºF)
- Temperature range: -30°C to +80°C (-20°F to +175°F)
- Accuracy: ±0.5°C from -10°C to +85°C (±0.9ºF from 14ºF to 185ºF)
- Resolution: 0.1% over the entire range
Battery:
- Power supply: 1 x battery type AA 1.5 Volt
- Battery life: Over 1 year, based on recording intervals of 5 minutes, using an alkaline battery with a nominal voltage of 1.5 V, as supplied.
Included in the following kits:
CCTK - Concrete Coatings Installer Tech Kit
similar products
FBSK5.1 - Feedback Datalogger Starter Kit
FBZK5.1 - Feedback Datalogger EZ Kit
CTP - Contact Temperature Probe - CTP
Additional information
| brand | Tramex |
|---|---|
| Industry sectors | Civil engineering |
