Your product

Tramex Water Damage Restoration Inspector Kit - WDIK

Wdik Water Damage Restoration Inspector Kit F No Text
Cmex5 Front 4 0 Concrete Usa
Cmex5 Back Angle On White Bg
Me5 Front On White Bg
Me5 Back Angle On White Bg
Dl Rhtx On Tripod Straight On White Bg
Cmex5 Ndt Iphone App Extension Handle F
Nw Rh Sample 4mm In Tile Logo
Me5 On Ceiling Extension Handle With App
Irt2 Infrared Thermometer
E5 Hbs Extension Handle And Bracket For Use With Me5 And Cme5
Hand Held Pin Probe Square Hh14tp30
Hand Held Probe With 7 Long Pins Square
Rhp Snw Short Narrow Rh Sample
Sal75 Calibration Salt Check For Hygro I2 Probe

Tramex Water Damage Restoration Inspector Kit - WDIK

Testing the moisture and relative humidity of building structures

SKU: TRAMEX WDIK Categories: , , ,

Required accessories relevant ...

CREATE VISUAL HUMIDITY MAPS AND REPORTS WITH THE TRAMEX METER APP

The Tramex Water Damage Restoration Inspector Kit WDIK is a complete kit for testing and monitoring the moisture content and relative humidity of environmental conditions, concrete, wood, tile, drywall, plaster and numerous building materials after water damage.

Walls and floors

With the Tramex ME5 for non-invasive testing of the moisture content of drywall, wood, plaster, bricks, tiles, resilient floor coverings, laminates and roofs. The ME5 has a double depth function that makes it possible to eliminate the influence of the substrate on the measured values.

concrete

The CMEX5 digital concrete moisture analyser from Tramex enables the quantitative measurement of moisture content using gravimetric tests as a basis, comparative testing of concrete and measurement of environmental conditions. The CMEX5 has a bayonet connection for the high performance pin probe for measuring moisture content in wood or WME in other building materials and for measuring relative humidity with the reusable Tramex Hygro-i2 RH probe.

Ambient conditions

The Tramex Feedback Datalogger provides live readings and logs the relative humidity, temperature and dew point in the environment as well as in materials and air spaces with the plug-in relative humidity probe. An infrared surface thermometer in conjunction with the CMEX5 hygrometer displays surface temperature and dew point conditions.

Moisture mapping

The Bluetooth connection to the Tramex Meters App enables visualisation of readings, moisture mapping and data reporting on mobile devices, GeoTag test results, creation, storage and sharing of photos, reports and graphs, as well as displaying the meter screen on your mobile phone when you go to hard-to-reach places.

The Tramex Water Damage Restoration Inspection Kit is supplied with an extension handle in a protective, hardwearing carry case with die-cut foam lining.

 

Concrete Moisture Encounter X5 - CMEX5 - Measuring range:

  • Tiefe des Eindringens in Beton: ca. 20mm (¾”)
  • Feuchtigkeitsgehalt für Beton: 0 → 6.9 %
  • Vergleichend für Gipsestrich: 0 → 12
  • CM-Äquivalent Anhydrit/Beton: 0→2.7 / 0→4.3
  • Referenzskala: 0 → 100
  • Relative Luftfeuchtigkeit: 0 → 99%
  • (mit optionalem Hygro-i2 ® Fühler): 0% → 99%RH +/- 2% @ 25°C / 77°F
  • Feuchtigkeitsgehalt für Holz (mit optionalen Holzstiftfühlern): 5 → 30 %

Moisture Encounter 5 - ME5 - Measuring range:

  • Holzfeuchtegehalt: 5 bis 30 %
  • Referenzskala für Baumaterialien: 0 bis 100
  • Depth of penetration:
    - Flat signal: up to 10mm (⅜")
    - Deep signal: up to 30mm (1¼")

Feedback Datalogger DL-RHTX Measuring range:

  • Speicher: 100.000 Datenpunkteinträge (Proben der Umgebungsluftfeuchte und -temperatur; Oberflächentemperatur)
  • Recording rate: Logger interval adjustable between 10 minutes and 1 hour
  • Transmission range: Up to 50m (165ft) line of sight
  • Bluetooth: BLE Bluetooth Low Energy 4.2 compliant

Specifications of the relative humidity sensor:

  • Range: 0 to 100%RH
  • Messgenauigkeit: ±1,5%RH Bereich 0% bis 80%RH ±2,0%RH Bereich 80% bis 99%RH (@ 25ºC (77ºF))
  • Resolution: 0.1% over the entire range
  • Drift: <0.25%RH per year

Specifications of the temperature sensor:

  • Range: -40ºC to 125ºC (-40ºF to 257ºF)
  • Messgenauigkeit: ±0,1 °C Bereich 20°C bis 60°C (±0,1ºF Bereich 68ºF bis 140ºF)
  • Sensor protection: PTFE film protects the sensor opening from water and dust Drift: 0.03 ºC (<0.04 ºF) per year
  • Drift: <0,03 ºC (0,04 ºF) pro Jahr

Infrared thermometer IRT2

  • Temperaturbereich: -50 bis 650 ºC (-58ºF ~ 1202ºF)
  • Verhältnis von Abstand zu Spot: D:S = 12:1
  • Resolution of the display:
    0.1 ºC (0.1ºF) 1000 Assumes an ambient temperature of 23 to 25 ºC (73 to 77ºF) -50 ~ 20ºC (-58ºF ~ 68ºF)
  • Accuracy for targets:
    ±2.5 ºC (4.5 ºF) 20 ºC ~300 ºC (68 ºF ~572 ºF) ±1.0% ±1.0 ºC (1.8 ºF) 300 ºC ~650 ºC (572 ºF ~ 1202 ºF) ±1.5%
  • Reproducibility:
    -50~20ºC (-58~68ºF): ±1.3ºC (2.3ºF) 20~650ºC (68~1202ºF): ±0.5% or ±0.5ºC (0.9ºF)
  • Ansprechzeit: 150ms
  • Spektrale Reaktion: 8~14um
  • Emissionsgrad: Digital einstellbar von 0,10 bis 1,0
  • Anzeige der Bereichsüberschreitung: LCD zeigt “—-” an
  • Polarität: Automatisch (keine Anzeige für positive Polarität); Minus (-) Zeichen für negative Polarität
  • Diodenlaser-Ausgang: <1mW, Wellenlänge 630~670nm, Klasse 2 Laserprodukt
  • Betriebstemp: 0 bis 50ºC (32 bis 122ºF)
  • Lagerungstemp: -10 bis 60 ºC (14 bis 140 ºF)
  • Relative Luftfeuchtigkeit: 10%~90%RH bei Betrieb, <80%RH bei Lagerung
  • Stromversorgung: 9V-Batterie, NEDA 1604A oder IEC 6LR61, oder gleichwertig
  • Sicherheit: ” CE ” Konform mit EMC

Specifications of the kit:

  • Größe: 43.5cm x 36cm x 14cm (17.1″ x 14.2″ x 5.5″)
  • Gewicht: 3.9kg (8.6 lbs)
  • Stromversorgung: 5 x AA-Batterien, 1 x 9-Volt-PP3-Batterie

 

Kit contents

Concrete Moisture Encounter X5 - CMEX5
Moisture Encounter 5 - ME5
Feedback Datalogger - DL-RHTX
Free App available for Android and iOS (phone not included)
Heavy-duty pin-type wood probe - HH14TP30
5″ (127mm) short narrow Relative Humidity probe - RHP-SNW
7.8″ (200mm) insulated pins for in-depth penetration - HH14SP200
Calibration Check Salts - SAL75
Infrared Thermometer - IRT2
Extension Handle - E5-HBS

tramex-wdik-eg-Data-Sheet

tramex-meters-app-eg-Getting-Started

tramex-meters-app-eg-dataloggers

tramex-meters-app-eg-Moisture-Mapping

Additional information

brand

Tramex
Standards

ASTM F2659
Industry sectors

Civil engineering
Substrates/substances

Oberflächen, Umgebungsluft, Holz & Nebenprodukte, Beton / Estrich, Mauerwerk / Ziegel, Trockenbau / Rigips, Verputz / Gips, Dachabdichtung / Flachdach, Elastische Bodenbeläge / Laminat
Mission

Temperatur- und Klimatests, Betonfeuchtigkeitsprüfung, Feuchtigkeitsprüfung, Holzfeuchteäquivalent WME, Kalibrierung

Interesting ...