Your product

Tramex Water Damage Restoration Master Kit - WDMK

Wdmk Water Damage Restoration Master Kit F No Text
Cmex5 Front 4 0 Concrete Usa
Cmex5 Back Angle On White Bg
Me5 Front On White Bg
Me5 Back Angle On White Bg
Dl Rhtx On Tripod Straight On White Bg
Cmex5 Ndt Iphone App Extension Handle F
Me5 On Ceiling Extension Handle With App
Dl Rhtx Hygro I2 Rhie2v1 In Situ Cut Concrete Iphonex App Live Readings F Small Room Horizontal Web Res
Nw Rh Sample 4mm In Tile Logo
Irt2 Infrared Thermometer
E5 Hbs Extension Handle And Bracket For Use With Me5 And Cme5
Hand Held Pin Probe Square Hh14tp30
Hand Held Probe With 7 Long Pins Square
Rhp Nwb Long Narrow Rh Sample
Hygro I2 Probe On White Bg
Rhhlsr Hygro I Hole Liner Yellow Hole Liner And Red Cap
Sal75 Calibration Salt Check For Hygro I2 Probe

Tramex Water Damage Restoration Master Kit - WDMK

Moisture assessment and monitoring in buildings after water damage

SKU: TRAMEX WDMK Categories: , , , ,

Required accessories relevant ...

CREATE VISUAL HUMIDITY MAPS AND REPORTS WITH THE TRAMEX METER APP

The Tramex Water Damage Restoration Master Kit is the ultimate kit for testing and monitoring the moisture content and relative humidity of environmental conditions, concrete, wood, tile, drywall, plaster and numerous building materials after water damage.

Walls and floors

With the Tramex ME5 for non-invasive testing of the moisture content of drywall, wood, plaster, bricks, tiles, resilient floor coverings, laminates and roofs at two depths. The ME5 has a double depth function that makes it possible to eliminate the influence of the substrate on the measured values.

concrete

The CMEX5 digital concrete moisture analyser from Tramex is used for non-destructive quantitative measurement of moisture content using gravimetric tests as a baseline, for comparative testing of concrete and for measuring environmental conditions. The CMEX5 has a bayonet connection for the high performance pin probe for measuring moisture content in wood or WME in other building materials, as well as reusable Tramex Hygro-i2 RH probes for in-situ testing of concrete, building materials, structures and air spaces.

Ambient conditions

Reusable Hygro-i2 sensor can be used with the Tramex Feedback Datalogger can be used to obtain live readings and time logs of relative humidity, temperature and dew point in the environment, materials and air spaces. An infrared surface thermometer in conjunction with the CMEX5 hygrometer provides surface temperature and dew point conditions.

Moisture mapping

The Bluetooth connection to the Tramex measuring device app enables visualisation of readings, moisture mapping and data reporting on mobile devices, GeoTag test results, creation, storage and sharing of photos, reports and graphs, as well as displaying the meter screen on your mobile phone when you go to hard-to-reach places.

The Tramex Water Damage Restoration Master Kit is supplied with a Extension handle in one protective, hard-wearing carrying case supplied with die-cut foam lining.

 

Concrete Moisture Encounter X5 - CMEX5 - Measuring range:

  • Tiefe des Eindringens in Beton: ca. 20mm (¾”)
  • Feuchtigkeitsgehalt für Beton: 0 → 6.9 %
  • Vergleichsweise für Gipsestrich: 0 → 12
  • CM-Äquivalent Anhydrit/Beton: 0→2.7 / 0→4.3
  • Referenzskala: 0 → 100
  • Relative Luftfeuchtigkeit: 0 → 99%
  • (mit optionalem Hygro-i2 ® Fühler): 0% → 99%RH +/- 2% @ 25°C / 77°F
  • Feuchtigkeitsgehalt für Holz (mit optionalen Holzstiftfühlern): 5 → 30 %

Moisture Encounter 5 - ME5 - Measuring range:

  • Holzfeuchtigkeitsgehalt: 5 bis 30%
  • Referenzskala für Baumaterialien: 0 bis 100
  • Depth of penetration:
    - Flat signal: up to 10mm (⅜")
    - Deep signal: up to 30mm (1¼")

Feedback Datalogger DL-RHTX Measuring range:

  • Memory: 100,000 data point entries (samples of ambient humidity and temperature; surface temperature)
  • Recording rate: Logger interval adjustable between 10 minutes and 1 hour
  • Transmission range: Up to 50m (165ft) line of sight
  • Bluetooth: BLE Bluetooth Low Energy 4.2 compliant

Relative Humidity Sensor Specifications:

  • Range: 0 to 100%RH
  • Messgenauigkeit: ±1,5%RH Bereich 0% bis 80%RH ±2,0%RH Bereich 80% bis 99%RH (bei 25ºC (77ºF))
  • Resolution: 0.1% over the entire range
  • Drift: <0.25%RH per year

Temperature Sensor Specifications:

  • Range: -40ºC to 125ºC (-40ºF to 257ºF)
  • Messgenauigkeit: ±0,1 °C Bereich 20°C bis 60°C (±0,1ºF Bereich 68ºF bis 140ºF)
  • Sensor protection: PTFE film protects the sensor opening from water and dust Drift: 0.03 ºC (<0.04 ºF) per year
  • Drift: <0,03 ºC (0,04 ºF) pro Jahr

Infrared thermometer IRT2

  • Temperaturbereich: -50 bis 650 ºC (-58ºF ~ 1202ºF)
  • Verhältnis von Abstand zu Spot: D:S = 12:1
  • Auflösung der Anzeige: 0,1 ºC (0,1ºF) <1000 1ºC >1000
    At an ambient temperature of 23 to 25ºC (73 to 77ºF) -50 ~ 20ºC (-58ºF ~ 68ºF)
  • Accuracy for targets:
    ±2.5 ºC (4.5 ºF) 20 ºC ~300 ºC (68 ºF ~572 ºF) ±1.0% ±1.0 ºC (1.8 ºF) 300 ºC ~650 ºC (572 ºF ~ 1202 ºF) ±1.5%
  • Reproducibility:
    -50~20ºC (-58~68ºF): ±1.3ºC (2.3ºF) 20~650ºC (68~1202ºF): ±0.5% or ±0.5ºC (0.9ºF)
  • Ansprechzeit: 150ms
  • Spektrale Reaktion: 8~14um
  • Emissionsgrad: Digital einstellbar von 0,10 bis 1,0
  • Anzeige der Bereichsüberschreitung: LCD zeigt “—-” an
  • Polarität: Automatisch (keine Anzeige für positive Polarität); Minus (-) Zeichen für negative Polarität
  • Diodenlaser-Ausgang: <1mW, Wellenlänge 630~670nm, Klasse 2 Laserprodukt
  • Betriebstemp: 0 bis 50ºC (32 bis 122ºF)
  • Lagerungstemp: -10 bis 60 ºC (14 bis 140 ºF)
  • Relative Luftfeuchtigkeit: 10%~90%RH bei Betrieb, <80%RH bei Lagerung
  • Stromversorgung: 9V-Batterie, NEDA 1604A oder IEC 6LR61, oder gleichwertig
  • Sicherheit: ” CE ” Konform mit EMC

Kit specifications:

  • Größe: 52cm x 48cm x 15cm (20.5″ x 18.9″ x 5.9″)
  • Gewicht: 4.9kg (10.8 lbs)
  • Stromversorgung: 5 x AA-Batterien, 1 x 9-Volt-PP3-Batterie

Kit contents

Concrete Moisture Encounter X5 - CMEX5
Moisture Encounter 5 - ME5
Feedback Datalogger - DL-RHTX
Free App available for Android and iOS (phone not included)
Heavy-duty pin-type wood probe - HH14TP30
7.8″ (200mm) insulated pins for in-depth penetration - HH14SP200
10″ (260mm) Narrow Wand Relative Humidity Probe - RHP-NW
1 x Hygro-i2 ® Relative Humidity probe - HIPP
Hole liners - RHHLSR
Calibration Check Salts - SAL75
Infrared Thermometer - IRT2
Extension Handle - E5-HBS

similar products

CALCRH - Calibration Check Plate CME5
CALBOXME5 - Calibration Check Box ME5
HIPP - Tramex Hygro-i2 Probe
HA21SP52 - Hammer Action Pin Type Electrode

tramex-wdmk-eg-Data-Sheet

tramex-meters-app-eg-Getting-Started

tramex-meters-app-eg-dataloggers

tramex-meters-app-eg-Moisture-Mapping

Additional information

brand

Tramex
Standards

ASTM F2170, ASTM F2659, BS 5325, BS 8201, BS 8203
Industry sectors

Civil engineering
Substrates/substances

Oberflächen, Umgebungsluft, Holz & Nebenprodukte, Beton / Estrich, Mauerwerk / Ziegel, Trockenbau / Rigips, Verputz / Gips, Fliesen / Dachziegel / Platten, Dachabdichtung / Flachdach, Elastische Bodenbeläge / Laminat
Mission

Temperatur- und Klimatests, Betonfeuchtigkeitsprüfung, Feuchtigkeitsprüfung, Holzfeuchteäquivalent WME, Kalibrierung

Interesting ...