TQC Sheen impact testers

Impact test for powder coatings

Impact testing is an important evaluation method for assessing the durability and resistance of powder coatings. In this test, coated materials are subjected to controlled impacts to simulate real-life conditions and possible stresses. By measuring the coating's ability to resist cracking, chipping or peeling upon impact, manufacturers can ensure that the powder coating meets or exceeds performance standards, providing valuable insight into the coating's overall robustness and protective properties in various applications.

Impact strength test for paints

The impact resistance test for coatings assesses the ability of the coating to withstand mechanical stress and prevent damage on impact. This assessment is particularly important for surfaces that are exposed to possible impacts or abrasion in practice. Common methods for testing impact resistance include the drop weight test and the Gardner impact test. In these tests, a specific weight or impactor is dropped onto a coated panel and the extent of damage, such as cracking or chipping, is observed and measured. This assessment helps manufacturers and quality control teams ensure that the colour coating meets performance standards and maintains its protective effect in demanding environments.

Model overview

• SP1880Impact test according to ISO 6272-2 / ASTM D2794

  StampImpact tester for indirect Impact tests according to ISO 6272-2 / ASTM D2794
  Contents: Base plate complete, guide tube, release ring, punch Ø12.7 mm, punch Ø15.9 mm, weight 1 kg, die Ø16.3 mm. Maximum thickness of the test plate: 4.5 mm

• SP1890Impact test according to ISO 6272-1

  BallImpact tester for direct Impact tests according to ISO 6272-1
  Contents: Base plate complete, guide tube, release ring, clamping device, ball Ø20 mm, die 27 mm, weight 1000 gr. Maximum thickness of the test plate: 1.25 mm

• SP1891Impact test according to ISO 6272-1 / ASTM D2794 (before 1993)

  BallImpact tester for direct Impact tests according to ISO 6272-1 and ASTM D2794 (before 1993).
  Contents: Base plate complete, guide tube, release ring, clamping device, ball Ø20 mm, die 27 mm, weight 1000 g, ball Ø15.9 mm, die 16.3 mm, weight 900 g

• SP1895Impact test according to ASTM G14

  StampImpact tester for direct Impact tests according to ASTM G14
  Contents: Base plate complete, guide tube, release ring, clamping device, punch Ø15.9
  mm, weight 1.361 kg and V-notch vice with spring clamp to hold the tube

• SP1896Impact test according to CSA

Standards for impact testing*

* If the desired standard is not listed below, please contact TQC to check whether the adoption of this standard is possible. Conformity with a specific standard depends on the type of impact tester. The combination of elements may change to comply with a different standard.

Laboratory-certified impact test

Each impact testing machine is supplied as a complete set (instrument and accessories)to perform a test according to the strictest requirements of the accredited laboratories of Qualicoat, QIB and GSB.