Your product

Tramex Water Damage Restoration Master Kit X - WDMK-X

Wdmk X Water Damage Restoration Master Kit X F
Mex5 Front Shallow Depth Screen F
Mex5 Back Side Angle 1
Cmex5 Front 4 0 Concrete Usa
Cmex5 Back Angle On White Bg
Dl Rhtx On Tripod Straight On White Bg
Hand Held Pin Probe Square Hh14tp30
Hand Held Probe With 7 Long Pins Square
Rhp Nwb Long Narrow Rh Sample
Rhie2 V1 Binder Connection Hygro I2 Probe X1 On White Bg Web Res
Irt2 Infrared Thermometer
Rhhlsr Hygro I Hole Liner Yellow Hole Liner And Red Cap
E5 Hbs Extension Handle And Bracket For Use With Me5 And Cme5
Hygro I2 Probe On White Bg
Sal75 Calibration Salt Check For Hygro I2 Probe

Tramex Water Damage Restoration Master Kit X - WDMK-X

For assessing and monitoring the moisture content and humidity in buildings in connection with water damage

SKU: TRAMEX WDMK-X Categories: , , , ,

Required accessories relevant ...

WITH BLUETOOTH AND ASSOCIATED APP

The Tramex Water Damage Restoration Master Kit X is the top-of-the-line kit with the best digital gauges for testing and monitoring the moisture content and relative humidity of environmental conditions, concrete, wood, tile, drywall, plaster and numerous building materials after water damage.

Walls and floors

With the multifunctional Tramex MEX5 for non-invasive testing of the moisture content of drywall, wood, plaster, bricks, tiles, masonry, resilient floor coverings, laminate and roofs at two depths. The MEX5 allows measurements up to a depth of 9 mm (⅜") and eliminates the influence of the substrate on the measured values. The numerous advanced settings include a basic setting that allows comparison with the standard target for dryness. The MEX5 measures the moisture content of wood and the pin meters measure the moisture content of drywall as well as WME comparison values in various building materials.

concrete

The CMEX5 digital concrete moisture analyser from Tramex enables instant, non-destructive quantitative measurement of moisture content using gravimetric tests as a basis. The CMEX5 also has a bayonet connection for reusable Tramex Hygro-i2 RH probes for in-situ testing of concrete.

Ambient and in-situ air conditions

The measuring devices have built-in hygrometers for ambient conditions, psychrometric values and enthalpy, a built-in infrared surface thermometer and also contain the external In-situ RH sensor for in-situ equilibrium RH measurements and psychrometric environmental conditions, temperature, GPP g/kg and dew point conditions. The reusable Hygro-i2 sensor can also be used with the Tramex Feedback Datalogger can be used to obtain live readings and time logs of relative humidity, temperature and dew point in the environment and in materials and air spaces. Built-in hygrometers and infrared surface thermometers provide psychrometric data, surface temperature, GPP g/kg and dew point conditions.

Moisture mapping

The Bluetooth connection to the Tramex Meters app enables visualisation of readings, moisture mapping and data reporting on mobile devices, GeoTag test results, creation, storage and sharing of photos, reports and graphs, as well as displaying the meter screen on your mobile phone when you go to hard-to-reach places.

The Tramex Water Damage Restoration Master Kit X comes with an extension handle in a protective, heavy-duty carrying case with die-cut foam lining.

 

Concrete Moisture Encounter X5 - CMEX5 - Measuring range:

  • Tiefe des Eindringens in Beton: ca. 20mm (¾”)
  • Feuchtigkeitsgehalt für Beton: 0 → 6.9 %
  • Vergleichsweise für Gipsestrich: 0 → 12
  • CM-Äquivalent Anhydrit/Beton: 0→2.7 / 0→4.3
  • Referenzskala: 0 → 100
  • Relative Luftfeuchtigkeit: 0 → 99%
  • (mit optionalem Hygro-i2 ® Fühler): 0% → 99%RH +/- 2% @ 25°C / 77°F
  • Feuchtigkeitsgehalt für Holz (mit optionalen Holzstiftfühlern): 5 → 30 %

Moisture Encounter MEX5 measuring range

  • Depth of penetration:
    - Flat signal: up to 9 mm (⅜")
    - Deep signal: up to 30mm (1¼")
  • NDT-Feuchtigkeitsgehalt für Holz: 0 → 30% MC
  • NDT Vergleichswert für Baumaterialien: 0 → 100
  • Pin % MC Holz: 6 → ca. 50% MC
  • Pin % MC Trockenbau: 0 → 8,5% MC
  • Relative Luftfeuchtigkeit: 0 → 99%
  • (mit optionalem Hygro-i2 ® Fühler): Luftfeuchtigkeit Genauigkeit: 0% → 99%RH +/- 2% @ 25°C / 77°F

Feedback Datalogger DL-RHTX Measuring range:

  • Memory: 100,000 data point entries (samples of ambient humidity and temperature; surface temperature)
  • Recording rate: Logger interval adjustable between 10 minutes and 1 hour
  • Transmission range: Up to 50m (165ft) line of sight
  • Bluetooth: BLE Bluetooth Low Energy 4.2 compliant

Relative Humidity Sensor Specifications:

  • Range: 0 to 100%RH
  • Messgenauigkeit: ±1,5%RH Bereich 0% bis 80%RH ±2,0%RH Bereich 80% bis 99%RH (bei 25ºC (77ºF))
  • Resolution: 0.1% over the entire range
  • Drift: <0.25%RH per year

Temperature Sensor Specifications:

  • Range: -40ºC to 125ºC (-40ºF to 257ºF)
  • Messgenauigkeit: ±0,1 °C Bereich 20°C bis 60°C (±0,1ºF Bereich 68ºF bis 140ºF)
  • Sensor protection: PTFE film protects the sensor opening from water and dust Drift: 0.03 ºC (<0.04 ºF) per year
  • Drift: <0,03 ºC (0,04 ºF) pro Jahr

Infrared thermometer IRT2

  • Temperaturbereich: -50 bis 650 ºC (-58ºF ~ 1202ºF)
  • Verhältnis von Abstand zu Spot: D:S = 12:1
  • Auflösung der Anzeige: 0,1 ºC (0,1ºF) <1000 1ºC >1000
    At an ambient temperature of 23 to 25ºC (73 to 77ºF) -50 ~ 20ºC (-58ºF ~ 68ºF)
  • Accuracy for targets:
    ±2.5 ºC (4.5 ºF) 20 ºC ~300 ºC (68 ºF ~572 ºF) ±1.0% ±1.0 ºC (1.8 ºF) 300 ºC ~650 ºC (572 ºF ~ 1202 ºF) ±1.5%
  • Reproducibility:
    -50~20ºC (-58~68ºF): ±1.3ºC (2.3ºF) 20~650ºC (68~1202ºF): ±0.5% or ±0.5ºC (0.9ºF)
  • Ansprechzeit: 150ms
  • Spektrale Reaktion: 8~14um
  • Emissionsgrad: Digital einstellbar von 0,10 bis 1,0
  • Anzeige der Bereichsüberschreitung: LCD zeigt “—-” an
  • Polarität: Automatisch (keine Anzeige für positive Polarität); Minus (-) Zeichen für negative Polarität
  • Diodenlaser-Ausgang: <1mW, Wellenlänge 630~670nm, Klasse 2 Laserprodukt
  • Betriebstemp: 0 bis 50ºC (32 bis 122ºF)
  • Lagerungstemp: -10 bis 60 ºC (14 bis 140 ºF)
  • Relative Luftfeuchtigkeit: 10%~90%RH bei Betrieb, <80%RH bei Lagerung
  • Stromversorgung: 9V-Batterie, NEDA 1604A oder IEC 6LR61, oder gleichwertig
  • Sicherheit: ” CE ” Konform mit EMC

Kit specifications:

  • Größe: 52cm x 48cm x 15cm (20.5″ x 18.9″ x 5.9″)
  • Gewicht: 4.9kg (10.8 lbs)
  • Stromversorgung: 5 x AA-Batterien, 1 x 9-Volt-PP3-Batterie

 

Kit contents

Concrete Moisture Encounter X5 - CMEX5
Moisture Encounter X5 - MEX5
Feedback Datalogger - DL-RHTX
Free App available for Android and iOS (phone not included)
Heavy-duty pin-type wood probe - HH14TP30
7.8″ (200mm) insulated pins for in-depth penetration - HH14SP200
10″ (260mm) Narrow Wand Relative Humidity Probe - RHP-NW
1 x Hygro-i2 ® Relative Humidity probe - HIPP
Hole liners - RHHLSR
Calibration Check Salts - SAL75
Infrared Thermometer - IRT2
Extension Handle - E5-HBS

tramex-wdmk-x-eg-Data-Sheet

tramex-meters-app-eg-Getting-Started

tramex-meters-app-eg-dataloggers

tramex-meters-app-eg-Moisture-Mapping

Additional information

brand

Tramex
Industry sectors

Civil engineering
Substrates/substances

Oberflächen, Umgebungsluft, Holz & Nebenprodukte, Beton / Estrich, Mauerwerk / Ziegel, Trockenbau / Rigips, Verputz / Gips, Fliesen / Dachziegel / Platten, Dachabdichtung / Flachdach, Elastische Bodenbeläge / Laminat
Mission

Temperatur- und Klimatests, Betonfeuchtigkeitsprüfung, Feuchtigkeitsprüfung, Kalibrierung

Interesting ...