Your products in the category
Calibration & Standards
Calibration standards, test foils and reference materials for checking and calibrating instruments, so that measurement results remain traceable.
SSPC VIS standards/comparators
DeFelsko SSPC-VIS NACE-VISGuidance and visual reference photos to complement the written SSPC/NACE standards
PosiTest AT - Calibrator
DeFelsko ATC1 PRBATCIdeal für die Überprüfung der Genauigkeit und des Betriebs von PosiTest Haftfestigkeitsprüfgeräten sowie ein wichtiger Bestandteil bei der Erfüllung von ISO- und internen Qualitätskontrollanforderungen. Die PosiTest- Reihe von Abziehhaftprüfgeräten misst mithilfe von Hydraulikdruck schnell und genau die Kraft, die erforderlich ist, um einen bestimmten Testdurchmesser der Beschichtung von einem Substrat abzuziehen.
TQC Sheen Standard - Calibration oil kits
TQC SH1584 SH1439 SH1480 SH1551 SH1575TQC Sheen calibration oil kits with ranges between 0 and 100 poise
TQC Sheen Standard - Calibration oils 400 to 4000 cPs
TQC SH0718 SH0855 SH0280Calibration oils: Viscosity = 400 to 4000 cPs at 25°C
TQC Sheen Standard - Viscosity Calibration Oils
TQC DV2200 - DV2214High-quality viscosity calibration oils for the precise calibration of TQC Sheen viscosity cups and rotational viscosity meters.
Paper test ink film applicator TK-100
Leneta TK-21-1This cost-effective aluminium applicator was specially developed for use with Leneta test inks. One side with a 250 µm gap applies a 75 mm wide film. The other side can be used as a practical scraper.
DeFelsko Standard - Certified coated metal panels and certified polystyrene blocks
DeFelsko S A PCertified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gauges and are an important component in meeting ISO and internal quality control requirements.
DeFelsko Standard - Certified step blocks
DeFelsko STDB1 STDB1M STDB2 STDB2M STDUTGPChecking the calibration and operation of ultrasonic thickness gauges. Calibration certificate included.
DeFelsko Standard - Certified and non-certified plastic plates
DeFelsko CSZertifizierte Kunststoff-Plättchen sind eine wirtschaftliche Alternative zu beschichteten Metallplatten. Sie haben eine reduzierte Genauigkeit von ±2 µm (±0,08 mil). Nicht zertifizierte Kunststoffplättchen ermöglichen eine schnelle Funktionsprüfung des Geräts. Ein Schichtdickenmessgerät misst die Dicke der Plättchen, wenn diese über eine glatte Metalloberfläche (Nullplatte) gelegt werden.
DeFelsko Standard - Zero plates steel and aluminium
DeFelsko STDZZero plates are available as uncoated, precision-machined steel or aluminium (6061-T6) in a variety of plate sizes.
DeFelsko Standard - Non-certified metal plate and glass zero plate
DeFelsko SPGZEROKITFor checking the function of Testex and other spring micrometer impression tape readers.
DeFelsko Standard - PosiTector BHI replacement glass zero plate
TQC BHIGLASSFor zero adjustment of worn or replaced indenters of the PosiTector BHI.
DeFelsko Standard - PosiTector BHI test discs
TQC BHITESTH BHITESTS BHITESTXSFor checking the function of Barcol hardness setters.
DeFelsko Standard - PosiTector RTR test strip
DeFelsko RTRCHKTAPE04Used to check the accuracy of the PosiTector RTR peak height density (RTR 3D only).
DeFelsko Standard - PosiTector RTR test discs
DeFelsko RTRCHKSHIM04Used to check the accuracy of the PosiTector RTR level heights (RTR H and RTR 3D).
DeFelsko Standard - PosiTector SHD test blocks
TQC SHDTESTIdeal for checking the function of durometers.
DeFelsko Standard - Set of certified plates
DeFelsko STDRTCSSUsed to check the accuracy and function of all Testex micrometers. Ideal for fulfilling ISO and internal quality control requirements.
DeFelsko Standard - Testex plate set
DeFelsko STDRTSHIMSFor checking the function of Testex and other spring micrometer impression tape readers.
PosiTest HHD - Verifier
DeFelsko HHDVERIFY HHDCVERIFYPosiTest HHD Verifier is a stand-alone voltage measurement device (Crest Meter, Jeep Meter) for checking the accuracy and operation of pulsed or continuous DC pore detectors
TQC Sheen Standard - Shore hardness test block set for durometers
TQC LD0556 LD0555The TQC Shore hardness test block set with different degrees of hardness. As a reference test, it indicates whether a durometer is working within the tolerances.
DeFelsko comparator - ICRI concrete surface profile comparison plates
DeFelsko CSP CSPTGComparison plates for the evaluation of the concrete surface profile (CSP). The International Concrete Repair Institute (ICRI) produces 10 different concrete profiles, which are formed using various surface preparation methods.
DeFelsko Comparator - NACE Visual Weld Comparator
DeFelsko VISWCThis visual comparator is used together with NACE SP0178 to determine the degree of surface finishing of weld seams.
DeFelsko comparator - Surface roughness comparison discs
DeFelsko SRCMAssessment of the surface profile depth generated by blasting by touch and visual inspection. The durable roughness discs contain four or five reference profile types per comparator. You can choose from steel shot, grit/slag and sand.
DeFelsko Standard - Set of certified PosiTector SPG plates
DeFelsko STDCSSSPGVerify the accuracy and operation of surface profile depth micrometers such as the PosiTector SPG.
DeFelsko Standard - Certified PosiTector SPG standards
DeFelsko STDSPGThe certified PosiTector SPG standards, together with the written calibration procedure, enable the recalibration of PosiTector SPG and other depth micrometer probes.
DeFelsko certified conductivity solution
DeFelsko SSTSLTN84The certified conductivity standard is used to check the accuracy of your PosiTector SST probe.
Calibration plates for the TQC Sheen cupping testers
TQC SP4330 SP4427The calibration plates are specially designed for the TQC Sheen cupping testers.
Leneta ST-1 ASTM colourant pigmented
Leneta ST-1It is a finely ground dispersion of high jet carbon black in a mixture of mineral oil and odourless white spirit. It is specified in ASTM D3450.
Leneta ST-31 ASTM penetrating colourant
Leneta ST-31This is a proprietary composition of pigment and dark colourant dispersed in an organic liquid carrier. Recommended for ASTM method D 3258, stain resistance and porosity test.
Leneta TK-11 paper test ink with high penetration for coated paper
Leneta TK-11For the assessment of mottling, absorption resistance and porosity of coated paper.
Leneta TK-21 paper test ink with low penetration for uncoated paper
Leneta TK-21For the assessment of mottling, absorption resistance and porosity of uncoated paper.
PosiTest LPD - Verifier
DeFelsko LPDVERIFYFor checking the electrical resistance of the PosiTest LPD.
Tank Coating Condition Guide
TQC LD3075A quick guide to marine coatings with evaluation criteria
TQC Sheen replacement calibration plate for digital surface roughness gauges
TQC SP1608A calibration plate for use with the TQC Sheen digital surface roughness gauge or the combined surface roughness and coating thickness gauge. Can be ordered as a spare or replacement.
TQC Sheen comparator - European rust degree scale ISO 8501
TQC LD3020 LD3027 LD3044 LD3045Contains high-quality colour photos for assessing the degree of rust and cleanliness after manual or mechanical cleaning (also by blasting). Target audience: Blasting and painting companies and their customers, paint technicians, consulting offices and industrial coating companies.
TQC Sheen comparator - ship propeller roughness comparator
TQC LD2041 LD2042TQC Sheen ship propeller roughness comparator for determining surface roughness both tactilely and visually
TQC Sheen comparator - Steel surface roughness reference discs
TQC LD2040 LD2050Visual and haptic comparison discs according to ISO 8503 part 1/2 made of high-quality steel. Shows the surface of sandblasted or shot-peened steel in accordance with ISO 8503 in the grades fine, medium and coarse.
TQC Sheen: The Paint Inspector's Field Guide
TQC LD3085Die Inspektion von Schutzbeschichtungssystemen für den Korrosionsschutz umfasst eine breite Palette von Prüfmethoden und -techniken. Der Paint Inspector's Field Guide behandelt ein breites Spektrum dieser Prüfmethoden, um den Anwendern die Grundlagen der Schutzschichtprüfung vor Ort zu vermitteln.
TQC Standard - Zero plates steel and aluminium
TQC LD5420Zero plate steel FE, aluminium NF or in a set for adjusting / testing a coating thickness gauge.
Tramex Hygro-i2® ASTM F2170 accessory pack - AP-F2170-B
TRAMEX AP-F2170-BAccessory package for carrying out ASTM F2170
Tramex calibration salt - SAL75
TRAMEX SAL75Tramex calibration salt for checking the RH probes
Tramex calibration test box for ME5 and MEX5 - CALBOXME5
TRAMEX CALBOXME5Tramex calibration checkbox for Moisture Encounter ME5 and MEX5
Tramex calibration test box for Skipper 5 - CALBOXSMM5
TRAMEX CALBOXSMM5Tramex Skipper 5 calibration test box
Tramex calibration test plate for CME and CMEX5 - CALCRH
TRAMEX CALCRHTramex calibration test plate for CME
Tramex MEP calibration test box - CALBOXMEP
TRAMEX CALBOXMEPTramex MEP calibration test box
Tramex MRH3 Calibration test box - CALBOXMRH3
TRAMEX CALBOXMRH3Tramex MRH3 calibration test box
Tramex SMP calibration test box - CALBOXSMP
TRAMEX CALBOXSMPTramex SMP calibration test box for Skipper Plus
Tramex accessory pack for CME5 & CMEX5 - AP-CM
TRAMEX AP-CMAccessory package for CME5 and CMEX5 concrete moisture analysers
Tramex accessory pack for ME5 & MEX5 - AP-ME
TRAMEX AP-MEAccessory pack for the ME5 and MEX5 moisture analysers
Tramex accessory pack for Skipper 5 - AP-SMM5
TRAMEX AP-SMM5Accessory pack for Skipper 5 moisture analyser
V5 150-T /-B/ -E - Calibration test
Taber V-5 150B/150E - Calibration CheckTo determine whether the Taber stiffness tester is functioning correctly, a calibration test should be carried out before each use.
Certified corrosivity test panels
KV-NSS/AASS/CASSTest panels are used to check the corrosiveness of corrosion test chambers in accordance with the corrosion test standards ISO 9227.
1700/1750 - Calibration test kit
Taber 1700/1750 - Calibration Verification KitDer Taber Rotary Platform Abraser (Abrader) 1700/1750 ist ein Präzisionsinstrument, das regelmäßig von einem autorisierten Taber-Kalibrierzentrum kalibriert werden muss. Die Häufigkeit dieser Kalibrierung sollte auf der Verwendung des Geräts, der Erfahrung und der guten Laborpraxis basieren und in die Qualitätsverfahren Ihres Unternehmens aufgenommen werden.
1700/1750 - Wheel Refacer 350 / Refacing Discs S-11/ST-11
Taber 350 / Taber S-11 / Taber ST-11Wenn Original Taber-Schleifscheiben des Rotary Abraser 1700/1750 verwendet werden, zerfallen sie langsam und legen frische Schleifkörner frei. Bei der Prüfung bestimmter Materialien kann es jedoch vorkommen, dass die Schleifscheibenflächen durch den adhäsiven Charakter der von der Probe abgetragenen Partikel verstopft werden. Dies verändert die Abriebeigenschaften der Scheibe und kann die Prüfergebnisse beeinträchtigen. Um diese Schwankungen zu verringern, muss die Arbeitsfläche von Schleifscheiben vor dem Einsatz und, falls erforderlich, in regelmäßigen Abständen gereinigt und aufgefrischt werden. Dieser Vorgang wird als Refacing bezeichnet.
No products found. Please adjust the filters.
